Shift Long Rewrite Heat Tolerant TF Memory Card for Taxi Cabin Recorder
Product Summary
Product Details
Taxi Cabin Recorder TF Card
,Shift Long Rewrite Storage
,Heat Tolerant Memory Card
Product Description
Shift Long Rewrite Heat Tolerant TF Memory Card for Taxi Cabin Recorder
A taxi or ride hailing cabin runs one of the hardest storage routines found in any vehicle. The ignition is switched on and off a hundred times a day, the recorder begins writing before the driver has closed the door, and the very same memory area is rewritten shift after shift for years. This shift long rewrite TF memory card is specified for exactly that duty cycle. Consecutive clips are spread across the whole NAND array instead of being stacked into one block, so the sequential write speed stays level after thousands of hours of cabin recording rather than degrading into dropped files.
Heat tolerance matters just as much. A windshield mounted recorder inside a closed cab during a summer shift passes 70 degrees Celsius well before noon, and thermal stress is what pushes a card out of the file system in the middle of a working day. This card pairs a low thermal resistance package with firmware that flushes the file table every thirty seconds, so an ignition cut at the end of a shift cannot leave the last clip unreadable. Fleet buyers can order mixed capacities in one carton, format each card inside the recorder once, and retire cards on a mileage schedule instead of waiting for a card error.
| Capacity | Speed Class | UHS Interface | Sequential Read | Sequential Write | Application |
|---|---|---|---|---|---|
| 32GB | Class 10 / U1 | UHS-I | Up to 90MB/s | Up to 50MB/s | Single channel cab recorder, short shuttle routes |
| 64GB | U3 / V30 / A1 | UHS-I | Up to 100MB/s | Up to 60MB/s | Dual channel cab recorder, one full shift |
| 128GB | U3 / V30 / A1 / A2 | UHS-I | Up to 180MB/s | Up to 150MB/s | HD front and rear cabin recording, two shifts |
| 256GB | U3 / V30 / A2 | UHS-I | Up to 180MB/s | Up to 150MB/s | Multi channel fleet cabin video, night shift archive |
| Parameter | Specification |
|---|---|
| Product Type | SD Card / TF Card / Memory Card |
| Model Number | S25128TLCA |
| Capacity | 8GB / 16GB / 32GB / 64GB / 128GB / 256GB / 512GB |
| Speed Class | C10, U3, V30, A1, A2 |
| Sequential Read | Up to 180MB/s |
| Sequential Write | Up to 150MB/s |
| Flash Type | NAND Flash Memory |
| Transmission Protocol | SD6.0 |
| File System | FAT32 / exFAT |
| Operating Temperature | -25C to 85C |
| Customization | OEM ODM Support |
- Shift long rewrite balance — Adaptive wear leveling moves each new clip to a fresh block, so a taxi cabin recorder keeps full write speed through an entire twelve hour shift without stalling.
- Heat tolerant operation — Writes are throttled before the die reaches its thermal limit, and every batch is soak tested at 85 degrees Celsius, which is where most cabin cards fail in summer.
- Ignition cut protection — The file table is flushed every thirty seconds so a driver switching off mid junction does not lose the clip that matters.
- Continuous loop without pause — When storage is full the oldest clip is replaced first, so the recorder never stops writing to ask the driver for a reformat.
- Stable read back for claims — Clips stay in sequential clusters after months of overwrite, so evidence can be pulled from the card on a laptop without a recovery tool.
- Recognition on first insert — Validated against mainstream cabin recorder chipsets on both FAT32 and exFAT, this TF memory card mounts as soon as it is seated.
- Taxi cabins recording front and rear channels over back to back shifts
- Ride hailing cars running a rolling archive across a full working day
- Shuttle and airport transfer vans on fixed short routes
- Driving school vehicles keeping a reviewable record of each lesson
- Rental car fleets where the card is checked between handovers
- Insurance telematics boxes storing triggered event clips
A: Endurance is set by total bytes written rather than calendar time. A 128GB card overwritten twice a day in a cabin recorder is normally replaced on a mileage schedule of twelve to eighteen months, and this card holds rated write speed for that whole window.
A: A card that overheats falls out of the file system and the recorder reports a card error. This heat tolerant memory card spreads heat into the slot, throttles writes ahead of the limit and is rated to 85 degrees Celsius, so recording continues through a parked cab in summer.
A: One shift of dual channel HD video usually fits inside 64GB, so the card can be pulled at handover. Fleets that keep two shifts on one card order 128GB, and operators running multi channel video move to 256GB.
A: Yes. OEM and ODM are both supported on this TF memory card: printed label, retail blister or color box, batch code per carton, and a pre set file system with the volume label your recorder firmware expects.
Cards are produced in our own Shenzhen facility on a fully automated test line, so samples leave in three to five working days and bulk orders in ten to fifteen days. Each carton carries a batch code that traces back to its test report, and our engineers advise fleet customers on capacity planning, file system choice and a spare card rotation policy.
