Automotive Grade Body Worn Camera Burst Write Power Loss Safe eMMC 5.1 16GB BGA153 Chip
Product Summary
Product Details
Automotive Body Worn Camera eMMC
,Loop Recording Endurance Flash
,16GB BGA153 Recording Storage
Product Description
Automotive Grade Body Worn Camera Burst Write Power Loss Safe eMMC 5.1 16GB BGA153 Chip
A body worn camera records continuously through a shift and locks only the segments that matter, so the storage device sees a loop buffer that is rewritten every day. This 8GB eMMC 5.1 is built for that pattern, with a high program erase cycle rating for loop recording and support for cache flush and reliable write semantics so a battery pull cannot destroy the segment just captured. Recording files, event metadata and firmware all live in the same eMMC 5.1 device, and the BGA153 package suits the compact camera bodies used by security, inspection and field service teams.
Battery removal is the moment that decides whether recorded footage survives. Because the eMMC 5.1 controller manages mapping and bad blocks independently of the host, committed data stays intact when power disappears mid write, and the append only loop structure lets the camera resume from the last valid segment. Static and dynamic wear levelling carry the daily buffer rewrite across the 3D TLC array, LDPC ECC protects ageing cells, and the -40 C to +105 C (AEC-Q100 Grade 2) range covers a camera worn in winter rain and summer sun alike. Health counters read through standard commands let the dock software flag a worn unit before a shift starts.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | G2816GPLCA |
| Capacity | 16GB |
| Recording Mode | Continuous loop buffer with event locked segments |
| Power Loss Behaviour | Cache flush honoured before battery removal |
| Shift Endurance | Full shift continuous write, daily recharge cycle |
| Package Type | FBGA153 153-ball, 11.5 x 13 x 1.0 mm |
| Memory Technology | pSLC optional |
| ECC Engine | LDPC ECC with bad block management |
| Wear Levelling | Static and dynamic |
| Thermal Range | -40℃ to +105℃ |
| Power Rails | VCC 3.3 V, VCCQ 1.8 V or 3.3 V |
| Endurance Class | Extended P/E cycle grade |
| Product Grade | Automotive Grade |
| Qualification | AEC-Q100 Grade 2 qualified, PPAP and PCN documentation on request |
Key Advantages
- High program erase cycle rating sized for daily loop buffer rewriting
- Cache flush and reliable write support protect the latest segment on battery removal
- Committed footage survives unexpected power loss through controller managed mapping
- Event metadata, firmware and recording buffer share one eMMC 5.1 device
- Static and dynamic wear levelling spread the daily buffer rewrite across the array
- LDPC ECC protects stored segments as 3D TLC cells age through heavy shift use
- Health counters readable by dock software through standard eMMC 5.1 commands
Buyer Questions
Q: What protects the last recorded minute when the battery is pulled?
A: The camera firmware issues cache flush commands at segment boundaries, and the eMMC 5.1 device honours reliable write semantics, so data already committed stays on the media. Only the in flight segment that had not been flushed can be lost, and the loop structure marks it invalid on restart.
Q: Is 8GB enough for a full shift?
A: For most body worn cameras recording at standard bitrates, a standard shift fits in 8GB with room for event locked segments and metadata. Choose 16GB when the unit records at higher bitrates or when event locks accumulate across several shifts.
Q: Does the eMMC suit a camera worn outdoors in rain and heat?
A: The operating range is -40 C to +105 C (AEC-Q100 Grade 2) and the package is a sealed BGA153 device with no removable contacts, so enclosure sealing is the only remaining protection concern. We recommend a gasket sealed body and a thermal pad routed away from the battery.
This configuration is supplied in automotive grade, AEC-Q100 Grade 2 qualified and produced under IATF 16949, with PPAP documentation, product change notification and a -40 C to +105 C operating range for vehicle and outdoor roadside installations.
The same device also comes in16GB (G2816GPLCA) for applications that need a larger local buffer while keeping the identical controller, package and qualification.
Samples are available with endurance data and packaging uses anti-static tray and vacuum sealed bags for export. Tell us your bitrate, shift length and event lock policy so we can confirm the body worn camera eMMC 5.1 capacity and loop layout.
