Greenhouse Climate Gateway Dual Voltage eMMC 5.1 64GB BGA153 Embedded Chip
Product Summary
Product Details
Greenhouse Gateway eMMC 5.1
,Dual Voltage Climate Flash
,64GB BGA153 Setpoint Storage
Product Description
Greenhouse Climate Gateway Dual Voltage eMMC 5.1 64GB BGA153 Embedded Chip
A greenhouse gateway sits between a cloud dashboard and dozens of sensors, vents, fans and irrigation valves. It holds climate curves, actuator rules and a rolling history of every alarm and correction, and it has to boot reliably after a mains dip in the middle of the night. This 64GB eMMC 5.1 covers that role with a dual voltage VCCQ option, so the same part number works on gateway boards built around 1.8V and 3.3V processors. The BGA153 package and standard eMMC 5.1 interface keep integration simple, and the 64GB density gives room for A/B firmware slots, climate profiles and years of setpoint history in one device.
Greenhouse gateways are commissioned once and then expected to run for a decade without a service visit. That expectation belongs in the storage choice: static and dynamic wear levelling spread the setpoint and alarm journals across the 3D TLC array, LDPC ECC protects ageing cells, and the high program erase cycle rating keeps the eMMC 5.1 inside specification through continuous actuator logging. Because the part exposes health counters through standard commands, the gateway can report storage wear alongside sensor health on the same dashboard. The -25 C to +85 C range and a choice of 64GB or 128GB densities let one design serve both small tunnels and large multi span glasshouses.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | G2864GTLCB / G28128TLCB |
| Capacity | 64GB / 128GB |
| VCCQ Option | 1.8V or 3.3V selectable per board design |
| Setpoint Journal | Climate curves, actuator events and alarm history |
| Update Slot | A/B firmware slots for remote greenhouse updates |
| Bus Interface | eMMC 5.1 with HS400 support |
| Form Factor | BGA153, 11.5 x 13 x 1.0 mm |
| Memory Technology | 3D TLC NAND flash, pSLC on request |
| Data Protection | LDPC ECC engine |
| Block Management | Static and dynamic wear levelling |
| Thermal Range | -25 C to +85 C |
| Operating Voltage | VCC 3.3 V with 1.8 V or 3.3 V VCCQ |
| P/E Cycle Class | Extended P/E cycle grade |
Key Advantages
- Dual voltage VCCQ lets one eMMC 5.1 part serve 1.8V and 3.3V gateway processors
- A/B firmware slots support remote updates without a site visit
- Setpoint and alarm journals sized for continuous actuator logging
- Static and dynamic wear levelling spread the rewritten journal blocks
- LDPC ECC sustains data integrity as 3D TLC cells age over a decade of duty
- Health counters available through standard eMMC 5.1 commands for dashboard reporting
- 64GB and 128GB densities cover small tunnels and large multi span glasshouses
Product Questions and Answers
Q: Can the same part work on 1.8V and 3.3V gateway boards?
A: Yes. VCCQ can be supplied at 1.8V or 3.3V, so a single eMMC 5.1 part number covers both processor families. Confirm the VCCQ rail on your board and we will match the configuration at production.
Q: Do we need 128GB for a climate gateway?
A: Most gateways fit comfortably in 64GB even with A/B update slots and several years of setpoint history. Choose 128GB when the gateway also stores camera snapshots, valve cycle analytics or long term historian data locally.
Q: How is the storage wear reported to our dashboard?
A: The gateway firmware can read life time estimates and bad block counters using standard eMMC 5.1 commands, then publish them next to sensor health. That gives operators a maintenance signal long before a storage device reaches its limit.
Anti-static tray and vacuum sealed packaging protect the BGA153 parts in transit, and preloaded firmware slots with a documented partition table are available for gateway projects. Send us your gateway board details and climate curve storage needs for a greenhouse climate gateway eMMC 5.1 recommendation.
