Introduction of PG Brand Industrial Grade SSD

China Chips Star's PG Brand industrialgrade SSD are categorized into four series:

· PCIe4.0 SSD (256GB–2TB)

· M.2 SATA SSD (128GB–2TB)

· mSATA SSD (64GB–2TB)

· 2.5-inch SATA SSD (64GB–2TB) 

PG brand industrial grade SSD, with their powerful performance and advantages, will inject new vitality into the development of the industrial field; I believe that in the future, it will play an important role in more fields and drive the continuous progress of industrial digitization. The following are the main features and advantages of PG brand industrial grade SSD.

Features of Industrial Grade SSD

1. High reliability: PG brand industrial grade SSD use high-quality Kioxia industrial grade nand flash, with an MTBF (mean time between failures) of 2 million hours, a UBER (uncorrectable bit error rate) of ≤ 10-17, and data retention time of up to 3 months after power failure.

2. Wide temperature operation: PG brand industrial grade SSD have wide temperature operation capabilities and can work normally in extreme temperature ranges, including extremely cold and hot environments, adapting to various harsh industrial environments. The wide operating temperature range is -40 ° C to+85 ° C.

3. Seismic and impact resistance: PG brand industrial grade SSD have strong seismic and impact resistance capabilities, with a seismic resistance of 16.4g 10-2000Hz and an impact resistance of 1500g 0.5ms.

4. Low power consumption: PG brand industrial grade SSD have lower power consumption during operation, which is beneficial for extending the service life of equipment and also in line with the current trend of energy conservation and environmental protection.

5. Rich functional features: PG brand industrial grade SSD support multiple functional features, such as AES hardware data encryption, Trim Command, ECC error correction, etc., to meet the needs of different industrial scenarios.

Advantage of Industrial Grade SSD

1. High speed read and write: PG brand industrial grade SSD have fast read and write speeds, with PCIe 4.0 SSD having a maximum read speed of 6500MB/s and a maximum write speed of 6000MB/s; The maximum read speed of SATA series SSD is 540MB/s, and the maximum write speed is 480MB/s; Far higher than common HDD, it can significantly improve overall system performance.

2. Long lifespan: PG brand industrial grade SSD use high-quality flash memory chips and control chips, which have a long service life and high reliability, with write/erase cycles far exceeding 3000 times, higher than industry standards.

3. Data security: HDD are often prone to failures under extreme conditions such as high temperature, high humidity, and strong vibrations, while industrial grade SSD, without mechanical components, can better resist the impact of harsh environments and ensure the safe and reliable storage of data.

4. High compatibility: PG brand industrial grade SSD have good compatibility with numerous brands of CPU platforms and operating systems, reducing the complexity and risk of system integration.

5. Wide application: PG brand industrial grade SSD can be used in automation equipment, medical equipment, power equipment, automotive electronic equipment, traffic monitoring equipment, security equipment, automotive data collection and other fields.