AGV Mission Log Industrial TF Card 128GB U3 V30 Shock Load Tolerant
Product Summary
Product Details
AGV Mission Log Storage
,Shock Load Tolerant Card
,U3 V30 Sustained Write
Product Description
AGV Mission Log Industrial TF Card for Warehouse Fleets
An AGV or AMR spends a shift collecting a dense chain of events: waypoint arrivals, lift commands, battery state, obstacle stops, speed derating and the exact reason a mission was abandoned. That AGV mission log is the only witness when a fleet manager asks why a tote reached the packing line forty minutes late, or why one vehicle keeps stalling at the same aisle junction. Keeping it inside the vehicle, on removable industrial media, means a technician can pull the record without a network link and without waiting for a cloud sync window.
This AGV mission log industrial TF card is built for that duty cycle. It is offered in 64GB, 128GB and 256GB on the SD6.1 UHS-I interface, exFAT formatted for long archives, and rated C10, U3 and V30 so sustained write throughput holds while the controller also streams lidar frames and battery telemetry. Sequential read reaches 180MB/s, which turns a month of AGV mission log retrieval into a short bench task instead of an afternoon.
Mechanical and Thermal Limits Matter More Than Peak Speed
A vehicle that docks hard, crosses expansion joints and reverses into a charging contact transmits that energy into every connector on the board. The card is specified for shock and vibration exposure typical of warehouse floors, and the -25C to 85C operating window covers cold stores and unheated loading docks as well as summer mezzanine heat. LDPC error correction keeps the volume mountable after an abrupt power cut at the charger, and 3,000 program and erase cycles reflect the real rewrite rate of a mission log that grows every few seconds.
Technical Specification
| Parameter | Specification |
|---|---|
| Model Number | S25128TLIA |
| Interface | SD6.1, UHS-I |
| Capacity | 64GB / 128GB / 256GB |
| Speed Class | C10, U3, V30 |
| Sustained Write | Up to 150MB/s |
| Sequential Read | Up to 180MB/s |
| Endurance | 3,000 program / erase cycles |
| Error Correction | LDPC ECC, power loss tolerant |
| Operating Temperature | -25C to 85C |
| File System | exFAT |
| Data Retention | 10 years at 25C |
Where This Card Fits
- Goods-to-person warehouses where each AGV mission log is reconciled against order completion times.
- Cold store and freezer aisles at -25C, where consumer cards slow down or drop off the bus.
- Mixed-fleet sites running several AGV brands behind one traffic controller.
- Depot and yard tractors with high vibration and frequent hard docking.
- Commissioning and field service, where the log is copied to a laptop on the spot.
Questions Buyers Ask
Can the AGV mission log be read on a standard PC?
The volume is exFAT, so Windows, macOS and Linux mount it without special drivers. A field engineer can copy the AGV mission log with a card reader and open the text or binary records directly.
What happens if the vehicle is powered down mid-write?
LDPC error correction and power loss tolerance let the card remount on the next boot. The record covering the interruption may be incomplete, which is expected for any removable media; logging resumes as soon as the controller restarts.
Is 128GB enough for a three-shift operation?
It depends on record size and interval. Sites that store waypoint events alone fit years on 64GB; sites that also save short diagnostic clips or full telemetry traces usually choose 256GB.
How is the U3 V30 rating relevant to a log writer?
It guarantees sustained minimum write speed instead of burst speed, so the controller is never blocked while several sensors push data at once.
Evidence With Every Lot
Production runs are supported with per lot documentation: thermal cycling across the rated window, sustained write verification at class, and capacity checking before packing. Cards can arrive pre-formatted with a site-specific folder tree and a customer label, with verification performed on the labelled media. Builders who audit their supply chain can file these reports against the lot number and answer an end-customer review without repeating tests on a finished vehicle.