Body Camera eMMC5.1 3D TLC HS400 Storage Chip 64GB 128GB 256GB BGA153 IC
Product Summary
Product Details
Body Camera eMMC5.1 Storage Chip
,HS400 240MB/s Sequential Write
,3D TLC BGA153 Embedded Flash
Product Description
Body Camera eMMC5.1 Storage Chip for Continuous Video Recording
A body camera loses footage for one dominant reason: the storage device cannot absorb a continuous video stream while the host keeps writing small metadata blocks in parallel. Our storage engineers have specified embedded flash for mobile video platforms since 2013, and this Body Camera eMMC5.1 storage chip was characterised on exactly that workload. The industrial grade eMMC5.1 pairs a high performance LDPC controller with 3D TLC NAND from tier-one wafer sources, delivering 330MB/s sequential read and 240MB/s sustained sequential write through an HS400 8-bit interface.
Because the controller, flash and firmware are validated as one stack, integrators receive predictable timing instead of a datasheet best case. Every reel is traceable to wafer lot, assembly line and test date, so a field return can be traced back to the exact process window.
Verified Technical Specification
| Model | Capacity | Read | Write | P/E Cycles | Package | Size (mm) |
|---|---|---|---|---|---|---|
| G2832GTLCA | 32GB | 330MB/s | 240MB/s | ≥3000 | BGA 153 | 11.5 x 13 x 1.0 |
| G2864GTLIA | 64GB | 330MB/s | 240MB/s | ≥3000 | BGA 153 | 11.5 x 13 x 1.0 |
| G28128TLIA | 128GB | 330MB/s | 240MB/s | ≥3000 | BGA 153 | 11.5 x 13 x 1.0 |
| G28256TLIA | 256GB | 330MB/s | 240MB/s | ≥3000 | BGA 153 | 11.5 x 13 x 1.2 |
Bus: eMMC 5.1 with HS400 timing, 1.8V I/O, backward compatible with HS200 and legacy modes. Operating temperature -40C to +85C, storage -40C to +85C. Model G2832GTLCA covers 32GB, G2864GTLIA covers 64GB, G28128TLIA covers 128GB and G28256TLIA covers 256GB.
Why This Body Camera eMMC5.1 Storage Chip Fits Mobile Video Platforms
- Continuous write stability. Firmware keeps write amplification low, so a 240MB/s stream does not collapse after the first cache flush, critical for 4K body camera loops of 8 to 12 hours.
- Power-loss tolerance. Cached mapping tables are committed on reset, so a battery pull mid-recording leaves the file system mountable on the next boot.
- Small footprint. The 11.5 x 13mm BGA153 device frees board area for image sensors and LTE modules in handheld enclosures.
- Dock-friendly throughput. 330MB/s read keeps evidence offload inside a 15 minute dock window on multi-bay stations.
- Thermal headroom. Sustained recording in a sealed housing stays inside the -40C to +85C envelope without throttling the video pipeline.
Validation We Share With Every Order
Each lot passes JEDEC JESD84-B51 timing verification, an HS400 eye-diagram scan, 72 hour soak write testing at 85C, and 5000-cycle power interruption testing. We supply the lot test report, wafer source declaration and marking photos before shipment, together with a 24 month warranty and failure analysis support within five working days of a returned sample.
Questions Buyers Ask About This Body Camera eMMC5.1 Storage Chip
Q: Can the chip sustain 4K recording without frame drops?
A: Yes. At 240MB/s sustained sequential write, the device covers typical 4K/30fps body camera bitrates of 60 to 100Mbps with wide margin, even with concurrent file-system metadata writes.
Q: Is HS400 really needed for a body camera?
A: It matters during offload and firmware update. HS400 read at 330MB/s shortens dock transfer and OTA provisioning, while the wider timing margin also helps on long traces in compact PCBs.
Q: How do you handle 3D TLC endurance in a rewrite-heavy device?
A: The LDPC controller plus wear levelling keeps rated endurance at 3000 P/E cycles. For cyclic-recording firmware that overwrites the same region, we recommend static wear levelling and can supply a matching firmware profile.
Q: Which model should I pick for a 128GB build?
A: G28128TLIA is the 128GB industrial grade device, same BGA153 footprint as the 64GB G2864GTLIA, so the board design does not change between capacity options.
Q: What support do you provide during design-in?
A: We provide the full datasheet, IBIS model, BGA153 land pattern, reflow profile and a reference tuning guide, plus engineering review of your boot partition layout before you release a tooling order.
Send your annual volume and target capacity and our engineering team will confirm the matching model, lead time and sample plan within one working day.